230V single-zone · Cooper & Hunter

Cooper & Hunter 9,000 BTU 230V Mini-Split

A 230V single-zone mini-split for one room

Updated October 2026

Quick verdict

A straightforward choice for a 350-400 sq ft room.

Strength
21.2 SEER2 with 230V power and R-454B refrigerant.
Trade-off
Heat-pump heating stops around 5°F; plan backup heat for colder days.
Right buyer
Larger rooms, open plans and garages with a 230V circuit available.
Cooling capacity (maker)
9000 BTU
SEER2 (maker)
21.2
SEER (maker)
21.2
Heats down to (maker)
5°F
Refrigerant
R-454B
Voltage
230 V
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Cooper & Hunter 9,000 BTU 230V Mini-Split is rated at 9,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 350 to 400 sq ft of average room. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.

Its 21.2 SEER2 ranks 4 of 10 among the mini-splits within about 12% of its capacity that we cover; the most efficient is the DELLA Optima 9,000 BTU 230V at 23. The maker says heat-pump heating keeps working down to 5°F outside; below that you need another heat source. Indoor noise is listed at 24 dB at its quietest setting.

Expect a professional install: the copper lines are connected, pressure-checked and vacuumed before the refrigerant is released. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025. Warranty, per the listing: 7 years compressor, 5 years parts.

The listing gives dimensions of 48 inD x 40 inW x 40 inH and a shipping or unit weight of 101.1 pounds.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 350-400 sq ft
  • Large rooms and garages

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 400 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 21.2 SEER2
  • Heats down to 5°F
  • Quiet indoor head (24 dB)

Cons

  • Heating stops around 5°F
  • Heating capacity not stated on the listing
  • Needs a 230V circuit
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity0.75 tonsRetailer
Cooling capacity (maker)9000 BTURetailer
Features (seller)WiFi EnabledRetailer
Dimensions (seller)48"D x 40"W x 40"HRetailer
SEER (maker)21.2Retailer
Voltage230 VRetailer
Noise (seller)24 dbRetailer
RefrigerantR-454BRetailer
ControlAppRetailer
Model numberCH-RLS09MIA-230VI/ORetailer
Warranty7 years compressor, 5 years partsRetailer
Product weight101.1 lbRetailer
SEER2 (maker)21.2Retailer
Heats down to (maker)5°FRetailer

Alternatives worth comparing

More ductless mini-splits we cover

All ductless mini-splits, compared in one table · Every Cooper & Hunter product we cover

Final verdict

A straightforward choice for a 350-400 sq ft room. Check that 9,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the Cooper & Hunter 9,000 BTU 230V Mini-Split cool?
At 9,000 BTU it matches the ENERGY STAR chart for about 350 to 400 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the Cooper & Hunter 9,000 BTU 230V Mini-Split heat?
The maker says it heats down to 5°F outside.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.