230V single-zone · Garvee

Garvee 9,000 BTU 230V Mini-Split

A 230V single-zone mini-split for one room

Updated October 2026

Quick verdict

A solid choice for a 350-400 sq ft room.

Strength
18.5 SEER, the 3rd best among similar-size systems we cover.
Trade-off
The listing doesn't state the lowest outdoor temperature it heats at; ask the maker before relying on it in a cold climate.
Right buyer
Larger rooms, open plans and garages with a 230V circuit available.
Cooling capacity (maker)
9000 BTU
SEER (maker)
18.5
Voltage
230
Noise (seller)
42 db
Dimensions (seller)
32.81"D x 14.17"W x 25.71"H
Product weight
83.1 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Garvee 9,000 BTU 230V Mini-Split is rated at 9,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 350 to 400 sq ft of average room. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.

Its 18.5 SEER ranks 3 of 4 among the mini-splits within about 12% of its capacity that we cover; the most efficient is the Senville AURA 9,000 BTU 230V at 28. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 42 dB at its quietest setting.

Like most split systems it ships pre-charged for a set line length; connecting it means flaring, pulling a vacuum and opening the valves, a licensed technician's job in most places. Warranty, per the listing: 2 years manufacturer.

The listing gives dimensions of 32.81 inD x 14.17 inW x 25.71 inH, a shipping or unit weight of 83.1 pounds, a 2,640 W power draw and hose in the box.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 350-400 sq ft
  • Large rooms and garages
  • Lower running costs than most same-size systems

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 400 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 18.5 SEER

Cons

  • Low-temperature heating not stated
  • Heating capacity not stated on the listing
  • Needs a 230V circuit
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity1250 cubic feetRetailer
Cooling capacity (maker)9000 BTURetailer
Features (seller)WiFi EnabledRetailer
Dimensions (seller)32.81"D x 14.17"W x 25.71"HRetailer
SEER (maker)18.5Retailer
Voltage230Retailer
Noise (seller)42 dbRetailer
Wattage2640Retailer
Product weight83.1 lbRetailer
ControlApp, RemoteRetailer
Model numbercF0-zZ096ws3-bpUa4RMN-bj2bn1uRetailer
Warranty2 years manufacturerRetailer

Alternatives worth comparing

More ductless mini-splits we cover

All ductless mini-splits, compared in one table · Every Garvee product we cover

Final verdict

A solid choice for a 350-400 sq ft room. Check that 9,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the Garvee 9,000 BTU 230V Mini-Split cool?
At 9,000 BTU it matches the ENERGY STAR chart for about 350 to 400 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the Garvee 9,000 BTU 230V Mini-Split heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.