230V single-zone · Mountman

Mountman 24,000 BTU 230V Mini-Split

A 230V single-zone mini-split for one room

Updated October 2026

Quick verdict

A sensible choice for a 1,400-1,500 sq ft room.

Strength
19 SEER2 with 230V power and its stated refrigerant.
Trade-off
The listing doesn't state the lowest outdoor temperature it heats at; ask the maker before relying on it in a cold climate.
Right buyer
Larger rooms, open plans and garages with a 230V circuit available.
Cooling capacity (maker)
24000 BTU
SEER2 (maker)
19
SEER (maker)
19
Room size (maker)
1500 sq ft
Voltage
230 V
Noise (seller)
26 db
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Mountman 24,000 BTU 230V Mini-Split is rated at 24,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 1,400 to 1,500 sq ft of average room; the maker says up to 1,500 sq ft. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.

Its 19 SEER2 ranks 6 of 11 among the mini-splits within about 12% of its capacity that we cover; the most efficient is the Cooper & Hunter 24,000 BTU 230V Mini-Split at 23.5. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 26 dB at its quietest setting.

Installation needs the lines vacuumed and the valves opened after the line set is connected; most makers tie the warranty to a licensed installer.

The listing gives dimensions of 12.28 inD x 42.83 inW x 15.31 inH.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 1,400-1,500 sq ft
  • Large rooms and garages

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 1,500 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 19 SEER2
  • Quiet indoor head (26 dB)

Cons

  • Low-temperature heating not stated
  • Heating capacity not stated on the listing
  • Needs a 230V circuit
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Cooling capacity (maker)24000 BTURetailer
Features (seller)Eco-Mode, Sleep Mode, Fan Mode, Auto-Swing, Dry Mode,Inverter Compressor,Silent ModeRetailer
Dimensions (seller)12.28"D x 42.83"W x 15.31"HRetailer
SEER (maker)19Retailer
Voltage230 VRetailer
Noise (seller)26 dbRetailer
Room size (maker)1500 sq ftRetailer
ControlRemoteRetailer
SEER2 (maker)19Retailer

Alternatives worth comparing

More ductless mini-splits we cover

All ductless mini-splits, compared in one table · Every Mountman product we cover

Final verdict

A sensible choice for a 1,400-1,500 sq ft room. Check that 24,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the Mountman 24,000 BTU 230V Mini-Split cool?
At 24,000 BTU it matches the ENERGY STAR chart for about 1,400 to 1,500 sq ft; the maker says up to 1,500 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the Mountman 24,000 BTU 230V Mini-Split heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.