230V single-zone · MRCOOL

MRCOOL Advantage 24,000 BTU 230V

A 230V single-zone mini-split for one room

Updated October 2026

Quick verdict

A solid choice for a 1,400-1,500 sq ft room.

Strength
17 SEER with 230V power and R-454B refrigerant.
Trade-off
The listing doesn't state the lowest outdoor temperature it heats at; ask the maker before relying on it in a cold climate.
Right buyer
Larger rooms, open plans and garages with a 230V circuit available.
Cooling capacity (maker)
24000 BTU
SEER (maker)
17
Room size (maker)
750 sq ft
Refrigerant
R-454B
Voltage
230 V
Noise (seller)
56 db
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The MRCOOL Advantage 24,000 BTU 230V is rated at 24,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 1,400 to 1,500 sq ft of average room; the maker says up to 750 sq ft. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.

Its 17 SEER ranks 5 of 6 among the mini-splits within about 12% of its capacity that we cover; the most efficient is the MRCOOL DIY 24,000 BTU 230V at 20.5. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 56 dB at its quietest setting.

Like most split systems it ships pre-charged for a set line length; connecting it means flaring, pulling a vacuum and opening the valves, a licensed technician's job in most places. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025.

The listing gives a 5,750 W power draw.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 1,400-1,500 sq ft
  • Large rooms and garages

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 1,500 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 17 SEER

Cons

  • Low-temperature heating not stated
  • Heating capacity not stated on the listing
  • Needs a 230V circuit
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity2 tonsRetailer
Cooling capacity (maker)24000 BTURetailer
Features (seller)Remote Controlled, WiFi EnabledRetailer
SEER (maker)17Retailer
Voltage230 VRetailer
Noise (seller)56 dbRetailer
RefrigerantR-454BRetailer
Room size (maker)750 sq ftRetailer
Model numberA-24-HP-C-230B, A-24-HP-WMAH-230BRetailer
Wattage5750 WRetailer
ControlRemoteRetailer

Alternatives worth comparing

More ductless mini-splits we cover

All ductless mini-splits, compared in one table · Every MRCOOL product we cover

Final verdict

A solid choice for a 1,400-1,500 sq ft room. Check that 24,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the MRCOOL Advantage 24,000 BTU 230V cool?
At 24,000 BTU it matches the ENERGY STAR chart for about 1,400 to 1,500 sq ft; the maker says up to 750 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the MRCOOL Advantage 24,000 BTU 230V heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.