Why it matters
The MRCOOL DIY 5th Gen 9,000 BTU 115V is rated at 9,000 BTU of cooling and 9,000 BTU of heating. On the ENERGY STAR room sizing chart that suits about 350 to 400 sq ft of average room; the maker says up to 350 sq ft.
Its 23.6 SEER2 ranks 3 of 20 among the mini-splits within about 12% of its capacity that we cover; the most efficient is the Senville Elite 9,000 BTU 230V at 33.3. Heating efficiency is 11.5 HSPF2. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one.
The line set comes pre-charged with quick-connect fittings, so the install skips the vacuum pump and refrigerant handling a standard mini-split needs. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025. Warranty, per the listing: Eligible for MRCOOL Care Program; 7-Year Compressor Warranty; 5-Year Limited Parts Warranty.
The listing gives air handler, outdoor condenser and pre-charged 25 ft quick connect line in the box.
Who it's for, and who should skip it
Good fit if
- Rooms of about 350-400 sq ft
- DIY installs
- Lower running costs than most same-size systems
Look elsewhere if
- Primary heat in cold climates
- Spaces much larger than 400 sq ft
- Line runs longer than the included pre-charged set
Pros and cons
Pros
- 23.6 SEER2
- 9,000 BTU heating stated
- No refrigerant handling to install
Cons
- Low-temperature heating not stated
Limitations to weigh
- Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
- Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
- The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Price | $2,029 | Retailer |
|---|---|---|
| Model number | DIY-09-HP-WM-115D25-O | Retailer |
| Cooling capacity (maker) | 9000 BTU | Retailer |
| Heating capacity (maker) | 9000 BTU | Retailer |
| SEER2 (maker) | 23.6 | Retailer |
| HSPF2 (maker) | 11.5 | Retailer |
| Room size (maker) | 350 sq ft | Retailer |
| Voltage | 115V | Retailer |
| Refrigerant | R-454B | Retailer |
| Warranty | Eligible for MRCOOL Care Program; 7-Year Compressor Warranty; 5-Year Limited Parts Warranty | Retailer |
Alternatives worth comparing
More ductless mini-splits we cover
- MRCOOL DIY 24,000 BTU 230V
- MRCOOL DIY 5th Gen 24,000 BTU 230V $2,574.99
- MRCOOL DIY 5th Gen 18,000 BTU 230V $2,609
- MRCOOL DIY 5th Gen 36,000 BTU 230V $3,469
All ductless mini-splits, compared in one table · Every MRCOOL product we cover
Final verdict
The pick if you want to install it yourself. Check that 9,000 BTU fits your room with the BTU calculator before you buy.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure