230V single-zone · Senville

Senville Aura 6,000 BTU 230V

A single-zone mini-split for one room

Updated October 2026

Quick verdict

A solid choice for a 150-250 sq ft room.

Strength
25.5 SEER2, the best among similar-size systems we cover.
Trade-off
The listing doesn't state the lowest outdoor temperature it heats at; ask the maker before relying on it in a cold climate.
Right buyer
Larger rooms, open plans and garages with a 230V circuit available.
Price
$969.99
Cooling capacity (maker)
6000 BTU
Heating capacity (maker)
7000 BTU
SEER2 (maker)
25.5
Room size (maker)
450 sq ft
Zones
1
$969.99Retailer price. Prices change; check the current price before you buy.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Senville Aura 6,000 BTU 230V is rated at 6,000 BTU of cooling and 7,000 BTU of heating. On the ENERGY STAR room sizing chart that suits about 150 to 250 sq ft of average room; the maker says up to 450 sq ft.

Its 25.5 SEER2 ranks 1 of 2 among the mini-splits within about 12% of its capacity that we cover, the top of that group. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one.

Like most split systems it ships pre-charged for a set line length; connecting it means flaring, pulling a vacuum and opening the valves, a licensed technician's job in most places. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025. Warranty, per the listing: 10-Year Compressor Warranty; 5-Year Parts Warranty.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 150-250 sq ft
  • Large rooms and garages
  • Lower running costs than most same-size systems

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 250 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 25.5 SEER2
  • 7,000 BTU heating stated

Cons

  • Low-temperature heating not stated
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Price$969.99Retailer
Model numberSENA-06HF-NLRetailer
Voltage230VRetailer
Cooling capacity (maker)6000 BTURetailer
Heating capacity (maker)7000 BTURetailer
SEER2 (maker)25.5Retailer
Room size (maker)450 sq ftRetailer
RefrigerantR-454BRetailer
Zones1Retailer
CertificationsUL, AHRIRetailer
Airflow382.6 cfmRetailer
Warranty10-Year Compressor Warranty; 5-Year Parts WarrantyRetailer

Alternatives worth comparing

More ductless mini-splits we cover

All ductless mini-splits, compared in one table · Every Senville product we cover

Final verdict

A solid choice for a 150-250 sq ft room. Check that 6,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

$969.99Retailer price. Prices change; check the current price before you buy.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the Senville Aura 6,000 BTU 230V cool?
At 6,000 BTU it matches the ENERGY STAR chart for about 150 to 250 sq ft; the maker says up to 450 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the Senville Aura 6,000 BTU 230V heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.