Why it matters
The Senville Floor Console 12,000 BTU 230V is rated at 12,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 450 to 550 sq ft of average room. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.
Its 22 SEER ranks 1 of 5 among the mini-splits within about 12% of its capacity that we cover, the top of that group. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 32.5 dB at its quietest setting.
Expect a professional install: the copper lines are connected, pressure-checked and vacuumed before the refrigerant is released. The kit includes a 16 Ft. Copper Line Set. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025.
The listing gives dimensions of 48 inD x 40 inW x 60 inH and a 3,527 W power draw.
Who it's for, and who should skip it
Good fit if
- Rooms of about 450-550 sq ft
- Low wall or under-window installs
- Lower running costs than most same-size systems
Look elsewhere if
- Primary heat in cold climates
- Spaces much larger than 550 sq ft
- Owners who want to avoid a licensed install
Pros and cons
Pros
- 22 SEER
- 16 Ft. Copper Line Set included
Cons
- Low-temperature heating not stated
- Heating capacity not stated on the listing
- Needs a 230V circuit
- Professional install recommended
Limitations to weigh
- Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
- Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
- The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Capacity | 1 tons | Retailer |
|---|---|---|
| Cooling capacity (maker) | 12000 BTU | Retailer |
| Features (seller) | Heating & Cooling Function | Retailer |
| Dimensions (seller) | 48"D x 40"W x 60"H | Retailer |
| SEER (maker) | 22 | Retailer |
| Voltage | 230 V | Retailer |
| Noise (seller) | 32.5 db | Retailer |
| Refrigerant | R-454B | Retailer |
| Model number | SENA-12HF/IF | Retailer |
| Wattage | 3527 W | Retailer |
| Control | App | Retailer |
| Line set included | 16 Ft. Copper Line Set | Retailer |
Alternatives worth comparing
More ductless mini-splits we cover
- Rellytech 9,000 BTU 115V Mini-Split
- Rellytech 12,000 BTU 115V Mini-Split
- Albott 12,000 BTU 115V Mini-Split
- Mountman 9,000 BTU 115V Mini-Split
All ductless mini-splits, compared in one table · Every Senville product we cover
Final verdict
A straightforward choice for a 450-550 sq ft room. Check that 12,000 BTU fits your room with the BTU calculator before you buy.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure