2-zone system · Senville

Senville 2-Zone 28,000 BTU 230V Mini-Split

One outdoor unit for 2 rooms

Updated October 2026

Quick verdict

A 2-zone system worth comparing.

Strength
23 SEER, the best among similar-size systems we cover.
Trade-off
The listing doesn't state the lowest outdoor temperature it heats at; ask the maker before relying on it in a cold climate.
Right buyer
Several rooms off one outdoor unit.
Cooling capacity (maker)
28000 BTU
SEER (maker)
23
Room size (maker)
1500 sq ft
Refrigerant
R-454B
Voltage
230 V
Noise (seller)
24 db
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Senville 2-Zone 28,000 BTU 230V Mini-Split is rated at 28,000 BTU of cooling. It splits that capacity between 2 indoor heads, so size each head to its own room and check the total against the condenser. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.

Its 23 SEER ranks 1 of 2 among the multi-zone systems within about 12% of its capacity that we cover, the top of that group. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 24 dB at its quietest setting.

Expect a professional install: the copper lines are connected, pressure-checked and vacuumed before the refrigerant is released. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025.

The listing gives dimensions of 9.18 inD x 33.4 inW x 11.76 inH and 2 indoor air handlers (12000 btu each), 1 outdoor condenser (28000 btu) in the box.

Who it's for, and who should skip it

Good fit if

  • Whole floors with several rooms
  • Lower running costs than most same-size systems

Look elsewhere if

  • Primary heat in cold climates
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 23 SEER
  • Quiet indoor head (24 dB)

Cons

  • Low-temperature heating not stated
  • Needs a 230V circuit
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity2.5 tonsRetailer
Cooling capacity (maker)28000 BTURetailer
Features (seller)Alexa EnabledRetailer
Dimensions (seller)9.18"D x 33.4"W x 11.76"HRetailer
SEER (maker)23Retailer
Voltage230 VRetailer
Noise (seller)24 dbRetailer
RefrigerantR-454BRetailer
Wattage13.86 MilliwattsRetailer
ControlVoiceRetailer
Model numberSENA-30HF/DRetailer
Room size (maker)1500 sq ftRetailer

Alternatives worth comparing

More multi-zone systems we cover

All multi-zone systems, compared in one table · Every Senville product we cover

Final verdict

A 2-zone system worth comparing. Check that 28,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How cold can the Senville 2-Zone 28,000 BTU 230V Mini-Split heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.