Window heat pump ยท Midea

Midea 8,000 BTU 115V Window Heat Pump

A window heat pump that heats with a heat pump, not just a resistance heater

Updated October 2026

Quick verdict

A solid choice for a 300-350 sq ft room.

Strength
14.5 SEER from the maker.
Trade-off
Professional installation and a dedicated circuit are still part of the cost.
Right buyer
Rooms where a split system isn't practical.
Cooling capacity (maker)
8000 BTU
SEER (maker)
14.5
Room size (maker)
350 sq ft
Refrigerant
R-32
Voltage
115 V
Noise (seller)
45 db
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Midea 8,000 BTU 115V Window Heat Pump is rated at 8,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 300 to 350 sq ft of average room; the maker says up to 350 sq ft. It runs on 115V, so it needs a dedicated household circuit rather than a 240V line.

The maker rates it at 14.5 SEER. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 45 dB at its quietest setting.

Like most split systems it ships pre-charged for a set line length; connecting it means flaring, pulling a vacuum and opening the valves, a licensed technician's job in most places. It uses R-32 refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025. Warranty, per the listing: 1 year limited.

The listing gives dimensions of 22.17 inD x 19.41 inW x 13.9 inH, a shipping or unit weight of 56 pounds, a 115 W power draw and 8000 btu window air conditioner w/ heat, remote control, installation kit/user manual, batteries in the box.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 300-350 sq ft
  • Rooms where a split won't fit

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 350 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 14.5 SEER

Cons

  • Low-temperature heating not stated
  • Heating capacity not stated on the listing
  • Professional install recommended

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity0.67 tonsRetailer
Cooling capacity (maker)8000 BTURetailer
Features (seller)Dehumidifier, Heating & Cooling Function, Inverter Compressor, Remote ControlledRetailer
Dimensions (seller)22.17"D x 19.41"W x 13.9"HRetailer
SEER (maker)14.5Retailer
Voltage115 VRetailer
Noise (seller)45 dbRetailer
RefrigerantR-32Retailer
Wattage115 WRetailer
ControlApp, Remote, VoiceRetailer
Model numberMAW08HV1CWTRetailer
Warranty1 year limitedRetailer
Product weight56 lbRetailer
Room size (maker)350 sq ftRetailer

More window and ptac heat pumps we cover

All window and ptac heat pumps, compared in one table

Final verdict

A solid choice for a 300-350 sq ft room. Check that 8,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the Midea 8,000 BTU 115V Window Heat Pump cool?
At 8,000 BTU it matches the ENERGY STAR chart for about 300 to 350 sq ft; the maker says up to 350 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the Midea 8,000 BTU 115V Window Heat Pump heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.