Window heat pump ยท Midea

Midea 12,000 BTU 115V Window Heat Pump

A window heat pump that heats with a heat pump, not just a resistance heater

Updated October 2026

Quick verdict

A solid choice for a 450-550 sq ft room.

Strength
13.3 SEER, the 2nd best among similar-size systems we cover.
Trade-off
Senville 12,000 BTU 230V PTAC Heat Pump rates higher at 14.5 SEER.
Right buyer
Rooms where a split system isn't practical.
Cooling capacity (maker)
12000 BTU
SEER (maker)
13.3
Room size (maker)
550 sq ft
Refrigerant
R 410A
Voltage
115 V
Noise (seller)
58 db
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The Midea 12,000 BTU 115V Window Heat Pump is rated at 12,000 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 450 to 550 sq ft of average room; the maker says up to 550 sq ft. It runs on 115V, so it needs a dedicated household circuit rather than a 240V line.

Its 13.3 SEER ranks 2 of 2 among the room heat pumps within about 12% of its capacity that we cover; the most efficient is the Senville 12,000 BTU 230V PTAC Heat Pump at 14.5. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 58 dB at its quietest setting.

Like most split systems it ships pre-charged for a set line length; connecting it means flaring, pulling a vacuum and opening the valves, a licensed technician's job in most places. It uses R-410A refrigerant, the older refrigerant new systems stopped using in 2025; remaining stock can still be installed. Warranty, per the listing: 1 year limited.

The listing gives dimensions of 22.17 inD x 19.41 inW x 13.9 inH, a shipping or unit weight of 58 pounds, a 115 W power draw and 12000 btu window air conditioner w/ heat, remote control, installation kit/user manual, batteries in the box.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 450-550 sq ft
  • Rooms where a split won't fit
  • Lower running costs than most same-size systems

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 550 sq ft
  • Owners who want to avoid a licensed install

Pros and cons

Pros

  • 13.3 SEER

Cons

  • Low-temperature heating not stated
  • Heating capacity not stated on the listing
  • Professional install recommended
  • Older R-410A refrigerant

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity1 tonsRetailer
Cooling capacity (maker)12000 BTURetailer
Features (seller)Dehumidifier, Heating And Cooling Function, Inverter Compressor, Remote Controlled, Wireless controlRetailer
Dimensions (seller)22.17"D x 19.41"W x 13.9"HRetailer
SEER (maker)13.3Retailer
Voltage115 VRetailer
Noise (seller)58 dbRetailer
RefrigerantR 410ARetailer
Wattage115 WRetailer
ControlApp, Remote, VoiceRetailer
Model numberMAW12HV1CWTRetailer
Warranty1 year limitedRetailer
Product weight58 lbRetailer
Room size (maker)550 sq ftRetailer

Alternatives worth comparing

More window and ptac heat pumps we cover

All window and ptac heat pumps, compared in one table

Final verdict

A solid choice for a 450-550 sq ft room. Check that 12,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the Midea 12,000 BTU 115V Window Heat Pump cool?
At 12,000 BTU it matches the ENERGY STAR chart for about 450 to 550 sq ft; the maker says up to 550 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the Midea 12,000 BTU 115V Window Heat Pump heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Mounting and wiring prep are DIY-friendly, but connecting and vacuuming the refrigerant lines is a job for a licensed technician, and the warranty may depend on it.