Why it matters
The Amana 9,000 BTU 230V PTAC Heat Pump is rated at 9,200 BTU of cooling. On the ENERGY STAR room sizing chart that suits about 350 to 400 sq ft of average room; the maker says up to 350 sq ft. It needs a 230V (208/240V) circuit, which usually means an electrician if one isn't already at the spot.
Its 11.4 SEER ranks 2 of 2 among the room heat pumps within about 12% of its capacity that we cover; the most efficient is the Senville 9,000 BTU 230V PTAC Heat Pump at 21. The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 46 dB at its quietest setting.
Installation needs the lines vacuumed and the valves opened after the line set is connected; most makers tie the warranty to a licensed installer. Warranty, per the listing: 5 years parts.
The listing gives dimensions of 21 inD x 42 inW x 16 inH, a shipping or unit weight of 99.2 pounds and 9,000 btu heat pump ptac in the box.
Who it's for, and who should skip it
Good fit if
- Rooms of about 350-400 sq ft
- Rooms where a split won't fit
- Lower running costs than most same-size systems
Look elsewhere if
- Primary heat in cold climates
- Spaces much larger than 400 sq ft
- Owners who want to avoid a licensed install
Pros and cons
Pros
- 11.4 SEER
Cons
- Low-temperature heating not stated
- Heating capacity not stated on the listing
- Needs a 230V circuit
- Professional install recommended
Limitations to weigh
- Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
- Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
- The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.
Specifications
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Capacity | 0.75 tons | Retailer |
|---|---|---|
| Cooling capacity (maker) | 9200 BTU | Retailer |
| Features (seller) | Automatic Emergency Heat, Condensate Dispersion System, Easy-Pull Out Filters, Wired Thermostat Compatible Automatic Emergency Heat, Condensate Dispersion System, Easy-Pull Out Filters, Wired Thermostat Compatible | Retailer |
| Dimensions (seller) | 21"D x 42"W x 16"H | Retailer |
| SEER (maker) | 11.4 | Retailer |
| Voltage | 230 V | Retailer |
| Noise (seller) | 46 db | Retailer |
| Wattage | 5 KW | Retailer |
| Product weight | 99.2 lb | Retailer |
| Model number | DHP093J50BA | Retailer |
| Warranty | 5 years parts | Retailer |
| Room size (maker) | 350 sq ft | Retailer |
Alternatives worth comparing
More window and ptac heat pumps we cover
Final verdict
A sensible choice for a 350-400 sq ft room. Check that 9,200 BTU fits your room with the BTU calculator before you buy.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure