DIY quick-connect · MRCOOL

MRCOOL Easy Pro 12,000 BTU 115V

A DIY quick-connect mini-split with pre-charged line sets

Updated October 2026

Quick verdict

The pick if you want to install it yourself.

Strength
Pre-charged quick-connect lines: no vacuum pump or refrigerant handling for the install.
Trade-off
The listing doesn't state the lowest outdoor temperature it heats at; ask the maker before relying on it in a cold climate.
Right buyer
Handy owners installing their own system without an HVAC technician.
Cooling capacity (maker)
12000 BTU
Heating capacity (maker)
12,000
Room size (maker)
550 sq ft
Refrigerant
R-454B
Voltage
115 V
DIY install
DIY Installation
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Why it matters

The MRCOOL Easy Pro 12,000 BTU 115V is rated at 12,000 BTU of cooling and 12,000 BTU of heating. On the ENERGY STAR room sizing chart that suits about 450 to 550 sq ft of average room; the maker says up to 550 sq ft. It runs on 115V, so it needs a dedicated household circuit rather than a 240V line.

The listing doesn't give a low-temperature heating limit, so treat it as a mild-climate heat pump until the maker confirms one. Indoor noise is listed at 43 dB at its quietest setting.

The line set comes pre-charged with quick-connect fittings, so the install skips the vacuum pump and refrigerant handling a standard mini-split needs. It uses R-454B refrigerant, one of the lower-impact A2L refrigerants new systems moved to in 2025. Warranty, per the listing: 2 Year Compressor Warranty.

The listing gives dimensions of 18 inD x 45 inW x 21 inH, a 586 W power draw and system and lineset in the box.

Who it's for, and who should skip it

Good fit if

  • Rooms of about 450-550 sq ft
  • DIY installs

Look elsewhere if

  • Primary heat in cold climates
  • Spaces much larger than 550 sq ft
  • Line runs longer than the included pre-charged set

Pros and cons

Pros

  • 12,000 BTU heating stated
  • No refrigerant handling to install

Cons

  • Low-temperature heating not stated
  • No SEER2 rating stated

Limitations to weigh

  • Capacity and efficiency are the maker's ratings; real output depends on the install, the line length and the weather.
  • Heat pumps lose heating capacity as it gets colder; size for your climate with the BTU calculator.
  • The federal 25C tax credit ended for systems installed after 2025; check your utility for current rebates.

Specifications

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Capacity1 tonsRetailer
Cooling capacity (maker)12000 BTURetailer
Features (seller)Fast CoolingRetailer
Dimensions (seller)18"D x 45"W x 21"HRetailer
Voltage115 VRetailer
Noise (seller)43 dbRetailer
RefrigerantR-454BRetailer
Wattage586 WRetailer
ControlApp, Push Button, Remote, VoiceRetailer
Model numberEZPRO-12-HP-11516D-ORetailer
Warranty2 Year Compressor WarrantyRetailer
Room size (maker)550 sq ftRetailer
Heating capacity (maker)12,000Retailer
DIY installDIY InstallationRetailer

Alternatives worth comparing

More ductless mini-splits we cover

All ductless mini-splits, compared in one table · Every MRCOOL product we cover

Final verdict

The pick if you want to install it yourself. Check that 12,000 BTU fits your room with the BTU calculator before you buy.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How big a room does the MRCOOL Easy Pro 12,000 BTU 115V cool?
At 12,000 BTU it matches the ENERGY STAR chart for about 450 to 550 sq ft; the maker says up to 550 sq ft. Sunny rooms, kitchens and high ceilings need more.
How cold can the MRCOOL Easy Pro 12,000 BTU 115V heat?
The listing doesn't state a low-temperature limit; ask the maker before using it as your main heat in a cold climate.
Can I install it myself?
Yes: it uses pre-charged quick-connect lines designed for DIY installs; you still need a dedicated circuit.